Ixia NTO 5236

Ixia NTO 5236 1/10/GE Carrier

  • Overview

  • Features

  • Specifications

  • Resources

High-Density 1GE and 10GE Visibility and High-Performance Solution for Fiber Networks

Ixia's Anue Net Tool Optimizer™ (NTO) 5236 network monitoring switch is ideally suited to provide high-performance 10G visibility for network monitoring tools in all parts of a fiber network. This includes the access, distribution and backbone layers as well as the server farm and data center environments. The Ixia Anue NTO 5236 aggregates, replicates and filters network traffic using the industry's most advanced, easy to use, drag-and-drop Control Panel.

The Ixia Anue NTO 5236 is available in a 10G version or a 1G fiber optic version. The 1G version can be upgraded in the field to the 10G version at a later date.

The Ixia Anue NTO 5236 includes two module slots on the rear of the unit where up to four 10G ports can be added that are available as expansion modules. Expansion modules are available to support CX4, XFP, and SFP+ interfaces. An optional remote power supply can serve as a redundant power source for high availability configurations.

The Ixia Anue NTO 5236 network monitoring switch uses an intuitive, CLI-Free Control Panel that manages complete configuration of the NTO system. Software updates and licensing are performed quickly and efficiently through the same industry-leading GUI.

  • Up to 24 SFP+ ports supporting 10GE and 1GE Ethernet (10Gbps and 1Gbps)
  • Up to four RJ-45 copper Ethernet ports
  • 10GE and 1GE versions available
  • 1GE version is field upgradable to 10GE operation
  • Optional Advanced Packet Processing available for packet de-duplication, extended burst protection, MPLS stripping, and packet / payload trimming (AFM2)
  • 10MB to 10GE Ethernet support
  • Non-blocking architecture; 244Gbps total bandwidth
  • Full line rate across all ports with filtering enabled
  • Port reconfiguration with no performance impact
  • Up to 28 ports available
  • Ports 1-20: 1GE (SFP) or 10GE (SFP+)
  • Ports 21-24: Up to 1GE copper
  • Modular Ports 1-4: 1GE SFP+, 10GE CX-4, 10GE XFP or 10GE SFP+
  • Ingress/Egress port programmability
  • Software port licensing
  • Timestamping (local and NTP)*
  • Burst Protection*
  • Port tagging
  • Monitoring tool port load balancing

General Specifications

Net Tool Optimizer® 5236
Performance

  • 10MB to 10GE Ethernet support
  • Non-blocking architecture; 244Gbps total bandwidth
  • Full line rate across all ports with filtering enabled
  • Port reconfiguration with no performance impact
Port Flexibility
  • Up to 28 ports available
  • Ports 1-20: 1GE (SFP) or 10GE (SFP+)
  • Ports 21-24: Up to 1GE copper
  • Modular Ports 1-4: 1GE SFP+, 10GE CX-4, 10GE XFP or 10GE SFP+
  • Ingress/Egress port programmability
  • Software port licensing
  • Timestamping (local and NTP)*
  • Burst Protection*
  • Port tagging
  • Monitoring tool port load balancing
Management
  • SNMP v1, v2, v3 support
  • TACACS+, RADIUS, and Local support (members and groups)
  • Granular access control features
  • Event logging
  • Syslog
  • IT Automation control (RESTful API)
  • IP based management port (RJ45 10/100/1000)
Filtering
  • Centralized filter templates
  • Custom dynamic filtering
  • Overlapping Filter Engine
  • Filter parameters (Layer 2-4)
  • MAC Source/Destination addresses
  • VLAN and Ethertypes
  • IP protocol and DSCP/TOS
  • Source/Destination IP (IPv4/IPv6)
  • UDP, TCP Ports
  • Protocol stripping (GTP, MPLS, VLAN, VNTAG)*

* Requires optional Advanced Features Module

Physical Specifications

Size and Weight
  • 1U high 19 rack mountable enclosure
  • Dimensions: 17.5W x 19L x 1.75H (inches)
  • Weight: 15.5lb (7 kg)
Power AC
  • Input AC Voltage: 90-240 VAC RMS auto-switching
  • Frequency: 50-60Hz
  • Nominal power requirement: 1.27A @ 110 VAC, 140W
  • Maximum power requirement: 3.2A @ 110 VAC, 353W
  • Heat/Power Dissipation: nominally 140Watts /478 BTU/hour
Power DC
  • Input DC Voltage: 12V DC
  • Nominal power requirement: 10A @ 12 VDC, 120W
  • Maximum power requirement: 25A @ 12 VDC, 300W

Operating Specifications

Environmental
  • Operating temperature: 0 to 30 C
  • Operating humidity: 10 to 85%, noncondensing
  • Fans: Automatic temperature-controlled DC fans (right to left airflow)

Regulatory/Safety

North American Safety
  • UL 60950-1, 2nd Edition
  • CSA C22.2 No. 60950-1, 2nd Edition

EMI/EMC

North American EMC
  • FCC part 15, Class A (USA)
  • ICES-003 Issue 4, Class A (Canada)

RoHS Compliant

Included Accessories

  • AC power cord
  • USB flash drive with activation license key
  • Rack mount kit

Data Sheet

Ixia Anue Net Tool Optimizer 5236 Data Sheet

NTO 5236

Solution Brief

ixia-eliminate-blind-spots

Network Visibility Solutions

Brochure

Converged Network Lifecycle Solutions

Ixia Solutions Brochure

Overview of Ixia's verification and visibility solutions used to design, verify, and monitor a broad range of wired, Wi-Fi, and 3G/LTE equipment and networks