Need Assistance?

Newsletter

For a Free Quote...

Inova OnTime Analog Clocks

 
inova analog1
inova analog2
inova analog detail3
 

  • About

  • Features

  • Specifications

  • Accessories

  • Resources

Accurate, sychronized time for schools and universities

Inova OnTime® Analog Clocks deliver accurate timekeeping to schools and universities.  Double-sided options are available, and protective wire guards can be purchased separately.  The single-sided model is a surface wall mounted design; the double-sided clock can be suspended from the ceiling or wall mounted perpendicular to the floor.

A network administrator can easily control one or hundreds of clocks from any PC on the network with a simple Telnet session. The option of centralized UPS backup allows devices to continue running even in the event of a power failure.

USA manufactured parts:

  • High quality polycarbonate lens
  • Single piece ABS molded case with theft-deterrent and earthquake resistant mounting slot
  • Easy to read dial with large numbers
  • Locally engineered circuit board
  • Inova Solutions developed and supported operating firmware
  • Highly secure command set, virtually impervious to tampering
  • Cloud based management system

German engineered movement and hands

ETL, FCC, CE marks

3 year warranty

Doubles come pre-assembled, which can save hours of time required by some suppliers. Inova Solutions invests that time prior to shipment.

Inova's double sided clocks only require a single Ethernet connection. This frees up one port on your powered switch, and eliminates the need to pull two Ethernet cables.

Inova has re-designed their double sided mounting to be strong AND thin, giving their double-sided clocks the thinnest profile in the industry.

 

  • Power supplied over standard Cat-5 cabling using the IEEE 802.3af Power over Ethernet standard 
  • *Note: Inova double sided analog clocks only require ONE Ethernet connection!
  • Low 3 watt power consumption
  • No master clock or serial connection required
  • Time set automatically by SNTP (Simple Network Time Protocol)
  • Automatic adjustment for Daylight Saving Time
  • Compatible with DHCP or static IP addressable 10/100BaseT Ethernet
  • ETL Listed, CE Marked
  • Optional cloud-based management system available
  • Fully assembled in the USA
  • Three year warranty

Technical Specifications 

Tech Specifications Analog

Mounting Options

  • Surface Mount - OnTime clocks have one keyhole slot on the back for surface mounting.
  • Pendant/Cantilever - The double-sided clock is supplied with a mounting bracket that allows you to choose wheter to suspend it on the ceiling or mount on the wall, allowing greater visibility in open areas or hallways. You can also piggyback two clocks, so time is visible in both directions.
*Note: Inova double sided analog clocks only require ONE Ethernet connection, and come fully assembled!

 

POE Injector

PoE Injectors

The Phihong Single Port 19.6W Injector provides a cost-effective Power over Ethernet (PoE) implementation for low terminal density installations. IEEE 802.3af compliant, the Phihong 19.6W provides power to virtually any PoE ready device.  

-Model Number: 722442
-Fully Compliant Detection, Disconnect, Overload and Voltage Control IEEE802.3af
-Interal Signature Resistance IEEE802.3af standard
-UNH IOL Test Report
-Diagnostic LEDs
-Full Protection OTP, OCP, OVP
-Non-Vented Case
-Mounting Kits 

 

 

Protective Wire Guards

For enhanced protection of your OnTime Clock

 

Mounting Options

 

Surface Mount

OnTime clocks have two keyhole slots on the back for surface mounting. The clock back also includes a recess for mounting over an Ethernet receptacle.

 
Mount Accesories div

Pendant

An optional mounting kit lets you hang OnTime clocks on ceilings, allowing greater visibility in large open areas or hallways. You can also piggyback two clocks, so time is visible from both directions.

To order a double sided digital clock, choose two of the same models and this mounting kit option.

*Note: double sided digital clocks require two Ethernet connections.

 
Cantilever div

Cantilever

An optional mounting kit lets you hang OnTime clocks on walls, allowing greater visibility in large open areas or hallways. You can also piggyback two clocks, so time is visible from both directions.

To order a double sided digital clock, choose two of the same models and this mounting kit option.

*Note: double sided digital clocks require two Ethernet connections.

 
Recessed Mount

Recessed Mount

Our recessed mount model lets you to inset the clock into a wall, creating a more finished look. Inova offers both 4-digit and 6-digit recessed mount models complete with trim in black metal.