Need Assistance?

Newsletter

For a Free Quote...

Other Time Server Products

Spectracoms Skylight System

 

Skylight Indoor GPS Timing System
Even though synchronizing network master clocks and time servers to GPS is well-known as the standard for the most time-sensitive applications, some data centers and critical server locations are not conducive to traditional roof-top GPS antenna installation. 

 

spectracom presentense software

Spectracom Synchronization Software
Windows and Linux software applications improves NTP and PTP deployments

Spectracom NetClock WiSync Wireless Clocks

Accurate, Legally Traceable Time, on display throughout your facility and campusSpectracom WiSync Wireless Display Clocks

These wireless clocks are synchronized to national and international time standards using a reliable, secure and manageable time server as the system’s master clock. Official time from the NetClock® time server is broadcast to the clocks by a wireless transmitter. Wireless clocks both receive and transmit the time resulting in a robust and accurate mesh network. Adjustment for DST is automatic and fully configurable.

Overview

  • Synchronize display clocks to computer networks, voice and video systems, telephony, security systems, building automation, access control, fire alarms, electronic record systems, etc.
  • Official time from GPS or dial-up service
  • Wire-free, battery-powered analog (24/110VAC also available)
  • Each clock acts as a transmitter and a repeater for a robust wireless mesh network
  • Proven 915-928 MHz frequency-hopping technology complies to North American regulations (check with your local authorities outside North America)
  • No FCC license required
  • Microprocessor-based clock with automatic calibration
  • Built-in diagnostic mode for easy maintenance
  • Made in the USA

Details

No more wondering which clock has the right time
These wireless clocks are synchronized to national and international time standards using a reliable, secure and manageable time server as the system’s master clock. Official time from the NetClock® time server is broadcast to the clocks by a wireless transmitter. Wireless clocks both receive and transmit the time resulting in a robust and accurate mesh network. Adjustment for DST is automatic and fully configurable.

Easy wire-free installation with unprecedented convenience
Perfect for replacing aging wired sync clocks. Battery-powered clocks are completely wire-free. 24/110 VAC option available. Simply mount a wireless clock near the transmitter (within 6,500 feet if in open space). As you add more clocks, they act together to disperse the signal strength to subsequent units and extend the range and coverage area of the transmitter. The system utilizes low-power 900 MHz frequency-hopping technology to eliminate interfering with other devices, and the time and expense of applying for and maintaining an FCC license. You can implement the system immediately.

Display time synchronized with network systems and devices
The system benefits much more than display clocks. Network deployments such as VOIP, records management systems (such as electronic health records), IT security systems, building automation, video surveillance, and regulatory compliance programs require accurate and reliable network time synchronization. The NetClock master clock is a network time server, improving the efficiency of the network applications. Finally, you can integrate display time and a clock system with your entire network infrastructure.

Documents

pdf WiSync Clock System Datasheet

WiSync-Mechanical_Drawings

pdf NetClock® WiSync™ Options and Accessories

NetClock WiSync Wireless Clock System Instructions