Sapling Synchronized Clock Systems
Sapling offers traditional wired and wireless systems, as well as IP-based WiFi and Ethernet clock systems. Explore our different systems below to find which one meets your application.
Wi-Fi System
Sapling Wi-Fi Clocks connect to a wireless local network and are capable of taking the accurate time from any NTP server, so a master clock is only optional. The Sapling Wi-Fi clocks come pre-programmed with the web addresses of public internet NTP servers. Each clock can be set and controlled through a user-friendly built-in web interface from any computer or mobile device (such as a tablet or smart phone).
Since Wi-Fi is the means of communication, Sapling Wi-Fi Clocks are ideal for facilities in need of many or just a few clocks spread far apart. It is also a great solution for multi-building campus environments utilizing existing Wi-Fi infrastructure.
WI-FI SYSTEM ADVANTAGES
- Wi-Fi Monitoring Software: Supervise the entire Wi-Fi clock system and receive analog clock low battery email alerts. This program will display all of the clocks that are present on the network and allow you to check on their status.
- Built-In Web Interface: Each clock has a web interface built right in, allowing the user to set features such as 12/24 hour mode (digital clocks only), time zone offset, domestic and international Daylight Saving Time, etc.
- E-Mail Alert: Get an email notification when a locally powered clock stops communicating.
- Server Synchronization Redundancy: Store up to 5 internal or external NTP/SNTP server addresses to ensure synchronization in the event that one of the servers fails to communicate.
IP PoE System
Sapling’s IP Power over Ethernet Clock System gives you piece of mind and total control. Each clock is powered by PoE or Power over Ethernet, which provides power and data over the same Ethernet cable. Each clock has the ability to receive its time from a (S)NTP time server, there is no need for a master clock.
All IP clocks within the system can be controlled independently using Sapling’s built-in web interface. This software allows you to monitor every feature of the IP clock system from anywhere with a network connection. No need to worry about your current system, PoE can integrate easily with existing networks.
IP PoE SYSTEM ADVANTAGES
- IP Monitor Software: Supervise the entire clock system and make system-wide changes using this simple PC program. This program will display all of the clocks that are present on the network and allow you to check on their status.
- Built-In Web Interface: Each clock has a web interface built right in, allowing the user to set features such as 12/24 hour mode (digital clocks only), time zone offset, domestic and international Daylight Saving Time, etc.
- E-Mail Alerts: Get notification of any power failures, major time changes, NTP/SNTP server synchronization issues, display faults or mechanical failures all through e-mail.
- Server Synchronization Redundancy: Store up to 10 internal or external NTP/SNTP server addresses to ensure synchronization in the event that one of the servers fails to communicate.
- Energy Efficient: Sapling’s digital IP clocks can be set to dim or turn off the time display at a scheduled time for energy efficiency
900MHz Wireless System
With a focus on innovation, Sapling’s Wireless Clock System operates on the patented 915-928 MHz frequency-hopping technology. This technology allows multiple secondary clocks to operate on the same frequency range without interfering with any additional wireless products you may have.
Sapling’s 900MHz Wireless System begins with the master clock, which can receive time from any SNTP/NTP server or GPS satellite. The master clock then sends out a signal to the secondary analog and/or digital clocks.
900 MHZ WIRELESS SYSTEM ADVANTAGES
- Each Wireless Clock Acts as a Repeater: All clocks within the wireless clock system have repeaters built into each unit, eliminating the need for additional equipment such as transmitters or extra repeaters. Every clock receives the wireless signal and sends out the time to neighbouring clocks, making Sapling’s system unique and extremely accurate.
- Clocks Receive Signal From Multiple Paths: With each clock in the system retransmitting the accurate time signal, the clocks in the system will generally have at least one backup signal to use in case of an issue. This adds an extra layer of insurance that the clocks in your system are displaying the correct time.
- Patented Frequency-Hopping Technology: Sapling’s 915-928 MHz frequency-hopping technology enables clocks in the system to receive the correct time, even if there is interference on any of the frequencies.
- No FCC License: With Sapling’s wireless clocks operating on an open frequency range, there is no need to purchase costly FCC licenses, saving you thousands of dollars over the life of the system.
- Web-Based Master Clock: Program the web-based SMA Series Master Clock from anywhere with an Internet connection. Its user friendly web interface is simple to use and can be setup within minutes.
2 Wire System
Sapling’s 2-wire digital communication is one of the most advanced systems in the world. Its simple installation and accurate timekeeping technology illustrate why Sapling is the leader in this industry. The 2-wire system utilizes only 2 wires for installation, one for data/power and the other as a reference.
Paired with Sapling’s Converter Box for power distribution, the 2-wire system is capable of running many clocks off a single converter box unit. Providing immediate correction for time change, the 2-wire system is also capable of running analog and digital clocks on the same 2 wires. This system is available only on 24V clock models.
2 WIRE SYSTEM ADVANTAGES
- Power and Data On The Same Line: The system integrates power and data on the same line, eliminating the need for a third wire.
- Instant Correction: Up to the second correction ensures that the 2-Wire Digital Communication system is always on time.
- Simple Installation: The 2-Wire system installation is effortless, and with features like automatic polarity detection, setup is even easier.
Sync-Wire (Retrofit) System
The Synchronous Wire system is the most popular system in the United States and Canada. Clocks are run using a power circuit that acts as its time base. The clocks receive an hourly correction which synchronizes both the minute and the second hand. Every 12 hours the clock receives a daily correction to keep the clock perfectly synchronized.
The integration of Sapling’s clocks into this system is effortless and provides maximum adaptability.
SYNC-WIRE SYSTEM ADVANTAGES
- Automatic Protocol Detection: Analog clocks are capable of recognizing 59 minute correction, 58 minute correction and even National Time/Rauland correction.
- Works On A Wide Variety of Voltages: Sync-Wire clocks can operate on 24V, 115V or 230V (international only), giving you maximum flexibility.
- Interfaces With Other Systems: Sapling Sync-Wire systems are capable of interfacing with other existing systems, making Sapling clocks a perfect choice for retrofitting or new installations.
Wireless Talk-Back System
Sapling’s TalkBack Technology is revolutionizing the way clock systems operate. Most wireless clock systems can only receive the time, but with Sapling’s TalkBack Technology, the TalkBack System allows facility managers to be completely proactive when it comes to monitoring and maintaining the clock system.
Gone are the days of hearing of broken or dead clocks from other personnel within the building. With Sapling’s TalkBack Wireless Clock System, the facility manger will have this information at their fingertips, giving them the upper hand in maintenance of the system.
Ideal for multiple building environments, Sapling’s TalkBack Technology works seamlessly without the need to install any wires and the ability to manage the entire clock system from one simple location.
WIRELESS TALKBACK SYSTEM ADVANTAGES
- No Additional Server or Software Required: With Sapling’s TalkBack System, any secondary clock has the ability to communicate its status back to the master clock, eliminating the need for excess servers or additional software.
- Battery Monitoring: TalkBack Technology enables the wireless clocks to report back their battery levels to the master clock. This allows the maintenance staff to be proactive when batteries need to be changed instead of receiving complaints from employees or guests within the building.
- Signal Strength: View the signal strength of every clock in the system to ensure communication and see which areas of the building provide the best and marginal signals.
- Mechanical or Display Alerts: Automatically receive a notification if there are any changes in the mechanical or display functionality in any clock in your system.
- E-mail Alerts: Be notified of any changes or warnings in the system immediately with the built-in email alert function. Whether your clock is low on batteries, has been power cycled or has any type of mechanical or display failure, TalkBack will notify you of these occurrences.
- No FCC License Required: Since Sapling’s TalkBack Technology works on 915-928 MHz frequency hopping technology with our wireless system, there is no need for a costly FCC license. This factor can save you thousands of dollars over the life of your clock system.